Page 1 of 1
Posted: Tue Sep 05, 2006 9:57 am
by Issy
We are looking for a metal dexter/yearling cattle crush. If anyone knows of one we are willing to pay and travel!!
Posted: Fri Sep 08, 2006 10:57 am
by Broomcroft
Issy
I don't know whether this helps or not, but we have 75 head and just use a normal cattle crush without problems. It cost us about £750+VAT brand new (IAE Warrior Crush).
Clive Taylor
Posted: Fri Sep 08, 2006 12:13 pm
by Issy
Thanks Clive that could be useful - we have been looking at the yearling crush but wondering how we would get a pregnant dexter in ??? will now look up the warrior crush.
Issy
Posted: Fri Sep 08, 2006 12:15 pm
by Issy
Sorry I forgot to ask but does it give you complete control (vice like) as the problem with our wooden one arose when one of the heifers had to have her inner eyelid injected. Thanks again. Issy
Posted: Sat Sep 09, 2006 6:01 am
by Inger
We use an ordinary cattle headbail. Its one of the walk through types, so it's even suitable for calves. Very handy for putting eartags in. Both sides of the bail move toward the center.
Posted: Sat Sep 09, 2006 6:13 am
by Broomcroft
Hi Issy
The Warrior is a simple crush. A lot of panels on the side drop down. The yoke is adjustable for different size necks for all but small calves. In terms of injecting eye-lids, the yoke holds the neck in the horizontal plane, so the head can go up and down between the bars. So, some other restraint such as a head-colour tied to the side would need to be utilised, which is what we do. I'm not saying it's the best crush around; it's just the one we know and use and is a reasonable price from new. It does not allow foot-trimming, but then our foot-trimmer insists on using his own crush in any case.
Clive